Go back

Simpel inspelning / Simple recording

1 - Cameras | Cameras

2 - Lighting | Lights

Turn on the lights

  1. Hold down the power button for about 2 seconds
  2. Adjusting brightness
  3. Adjust color temperature
    ✴ 5600k = cooler color
    ✴ 3200k = warmer color

Turn on the studio-lights

  1. Hold down the power button, roughly 2 seconds
  2. Adjust the brightness
  3. Adjust color temperature
    ✴5600k = colder
    ✴3200k = warmer

3 - Microphones | Microphones

  1. Start the sound mixer, hold down the power button on the back of the mixer for about 3 seconds
  2. Turn on the microphone receiver, press and hold the power button until the indicator lights up green
  3. Turn on the microphone transmitter, press and hold the power button until the indicator lights up green

Attach the clip-on microphone to your clothing, for example to your collar or lapel.

The distance to your mouth should be about 25 cm. The distance affects the sensitivity of the clip-on microphone. Reduce the distance if you speak at low volume and increase it when you speak loudly.

  1. Start the sound-mixer, hold down the power button, on the backside of the mixer, roughly 3 seconds
  2. Start the receiver that is connected to the mixer by holding down the power button until the indicator starts glowing green
  3. Start the transmitter by holding down the power button until the indicator starts glowing green

Fasten the clip-on microphone to your clothes, for example on your collar or lapel.

The distance to your mouth should be about 25 cm. The distance affects the sensitivity of the clip-on microphone. Reduce the distance if you are speaking at a low volume, and increase it when speaking loudly.

4 - Sound levels | Sound level

  1. Use the sliders to adjust the sound level for each microphone.
  2. The sound mixer display shows feedback if the microphone volume is working, or if the sound is too low or high
  3. Four microphones can be used simultaneously in the mixer

ATTENTION! Keeping an eye on the level meter, speak at a natural level as close to the microphone as you will be when recording. Your sound should jump onto the yellow part of the meter as you speak.

  1. Use the sliders to adjust the level for that channel you connected the receiver to
  2. The display shows feedback if the sound from the microphone is working or if the sound is too low or too loud
  3. You can use up to four microphones simultaneously in the mixer

Note! Keeping an eye on the level meter, talk at a natural level as close to the microphone as you will be when recording. Your audio should be reaching the yellow section of the meter while you’re talking

5 - Start recording | Start recording

  1. Launch OBS or Camtasia on your computer
  2. To start recording, click “Start Recording” at the bottom right of the OSB
  3. Click on “Stop Recording” to end the recording

Use Camtasia for recording and OBS for simultaneous streaming and recording

  1. Start “OBS” on the computer
  2. To start the recording, click “Start Recording” in the bottom right corner
  3. Click “Stop Recording” when you are done recording

Use Camtasia for recording and OBS for simultaneous streaming and recording.